V2000-c Rfid Access Control User Manual 'link' 🎁 Editor's Choice

The V2000-C RFID Access Control System is a powerful and reliable solution for managing access control in various applications. With its user-friendly interface, durable design, and advanced features, the V2000-C system provides a comprehensive access control solution that meets the needs of organizations of all sizes. Download the V2000-C RFID Access Control User Manual today and discover how to get the most out of your access control investment.

Enter Programming Mode -> Press 2 + 0000 + # . 4. Door Open Modes You can configure how users gain entry: Card Only: Press 3 + 0 + # . Card + PIN: Press 3 + 1 + # . Card or PIN (Default): Press 3 + 2 + # . 5. Setting the Door Delay Time V2000-c Rfid Access Control User Manual

The manual dedicates its first sections to the physical setup, which is often the most daunting part for non-technical users. The V2000-C RFID Access Control System is a

⚠️ Perform a factory reset if default master code does not work (usually by shorting a reset jumper or powering on while pressing # ). Enter Programming Mode -> Press 2 + 0000 + #

The V2000-C RFID Access Control is a waterproof, standalone single-door system supporting up to 2,000 users with RFID card or PIN authentication. It features an adjustable relay for electronic locks, operating on 12V DC, with programming that includes setting user cards, PINs, and access modes. For official digital copies, you can access the Obohands English Manual Download from the manufacturer's site. RFID Access Control System User Manual - uAmper